The installation method of the Kelinai window countertop can refer to the following key steps and precautions:
Installation steps
Preliminary preparation and measurement
Before installation, accurately measure the dimensions of the window sill and confirm the installation positions of components such as the washbasin and drainage pipes. It is recommended that it be operated by professionals to avoid installation failure caused by dimensional errors.
Confirm the dimensions of equipment such as gas stoves and sinks in advance to facilitate the factory’s pre-drilling and reduce the risk of on-site drilling.
Basic treatment and inspection of embedded parts
The installation of window sill stone should be completed before the wall treatment to facilitate the repair of gaps. If installation is required after wall treatment, it is necessary to ensure that the gap with the wall does not exceed 2 millimeters.
Check whether the embedded parts (such as wooden bricks and iron blocks) meet the installation requirements to ensure that the embedded components are stable.
Countertop installation and fixation
When installing, it is necessary to ensure that the countertop fits the wall without any gaps and that the drainage pipe is firmly connected to prevent water leakage.
Seal the joints with glass glue and avoid using cement to fill the joints to prevent cracking or a decline in aesthetic appeal.
Finished product protection and acceptance
During the installation process, it is necessary to protect the already decorated corners and window openings to avoid damage.
After installation, conduct a comprehensive inspection to ensure that the countertop is flat, the joints are tight and the drainage is smooth.
Precautions
Environment and Temperature
Avoid installation in a low-temperature environment during winter to prevent loose bonding or overly large seams.
Tools and Materials
Prepare tools such as electric welding machines, stone saws and hand drills to ensure a smooth installation process.
Use high-quality anti-mold glue to treat the seams to avoid cracking or yellowing caused by inferior glue.
Safety and Protection
Wear a dust mask when installing to reduce the inhalation of dust.
It is recommended that the cutting operation be carried out outdoors. If indoor work is required, the range hood and other equipment should be protected with dust-proof film.
Maintenance and upkeep
After installation, avoid opening Windows or cleaning immediately. Wait until the glass glue has cured before cleaning.
Avoid scratching the countertop with hard objects during daily use and keep the surface smooth and clean.
